|
Template mockup - Test fitting a "box" style IC scoop. Heavy black lines where to establish the angle at which the sco
Date: 01/13/2006
Views: 142
|
Template mockup - Used heavy cardstock to cut out and fit the scoop design. Pieces where added on the end to finish final fit.
Date: 01/13/2006
Views: 145
|
Template mockup - Front view. Notice the A2A system does not sit centered like stock due to pipe routing. This is not a flaw.
Date: 01/13/2006
Views: 177
|
|
Template mockup - Front view angled to see "box" style.
Date: 01/13/2006
Views: 174
|
Template mockup - Fitment for driver side of the IC. Another piece will be added for final assembly to bolt into the stock locat
Date: 01/13/2006
Views: 169
|
Template mockup - View of passenger side of IC. A piece will be added during final assembly to bolt into stock location.
Date: 01/13/2006
Views: 180
|
